about us

products

projects

faqs

media

contact us

home

 

 



 

 

 

 

 

 



 

 

 

610V Aeroturbine

The 610V Aeroturbine consists of a helical rotor and airfoils housed within a 6 ft. x 10 ft. steel cage and weighs approximately 450 lbs. with the alternator attached.  The 610V is intended for vertical mounting and can be either bolted or ballasted down.  Vertical Aeroturbines work well in winds from any direction, and therefore the presence of a dominant wind direction is not critical.  The 610V is modular and may be stacked when needing more power. The standard overall height of the 610V Aeroturbine is 20 ft. tall. The base and caged rotor structures are both 10 ft. tall.

 

All Aeroturbines are designed and custom-built to fit the architecture of the building. Exact costs will depend on project location, number of turbines purchased, and the required mounting method.  The 610V Aeroturbine has an estimated cost of $15,000.  This price includes the rotor, cage, mounting structures, and electronic equipment.  The installed cost of Aeroturbines will dramatically decrease once manufacturing is in place.

In order to operate efficiently, Aeroturbines must be installed in at least 10 mph per year average wind speeds. In this average, each 610V Aeroturbine can produce 2,000 kWh annually. The 610V Aeroturbine needs to be building attached to flat roofs, and above or away from surrounding trees and other obstructions. The 610V rated power @ 32 mph wind speed is 1000 Watts (159 RPM).

Aeroturbines are available for limited multifamily residential buildings, institutional buildings and commercial buildings in the Chicago area and on a very limited basis everywhere else.

We currently do not have an extensive dealer network in place. You would need a certified dealer in your area to take delivery of the Aeroturbine, install it and maintain it properly. We currently have dealers located in Chicago, Illinois and Oconomowoc, Wisconsin. Any projects outside a radius of 50 miles from one of our dealers will be carefully considered by the CEO. Once manufacturing is in place we will be able to service more customers with more dealerships.

Power Specifications

Aerotecture Warranty
Certification Letter